I have moved!

Please visit the new and improved Paper Garden Blog. I'd love to have you stop by. Just click HERE
Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Tuesday, September 9, 2008

No Tricks, Just a Treat (holder)

I really love the papers that come with the Halloween Kits in the Paper Garden Projects Store. The colors are so nice and mellow, yet still fun!


I thought I'd share another treat holder idea. I love pocket cards for little treats, but sometimes if my treat is thick (like the baggie of M&M's I'll be using here), either I can't get it into the pocket, or it strains the adhesive on the pocket edges so much that sometimes it starts to pull apart.


For this card, an envelope is used to create a gusseted pocket inside the card to hold the treat. The card is held closed by wrapping embroidery thread around two buttons.







For the card, all the supplies needed are included in the Best Witches card kit, except for embroidery floss, an envelope and adhesive.


You need:
  • Pixie Sticks Paper, 12”x4 ¼”
  • Stamped Don’t Drink and Fly Witch, colored as you desire and cropped to 3 ¾”high by 3 ¼” wide.
  • 3 ½” by 4 ½” matte of Honeycomb for image.
  • 3 ¾” by 4 ¾” Raven Matte for image.
  • Stamped Halloween Tip sentiment cut out and mounted on Honeycomb and then Raven paper.
  • 3 ½” square piece of cream for inside
  • 3 ¾” square matte of Raven for inside.
  • Two buttons
  • Embroidery floss
  • An A2 envelope
  • Adhesive

Seal the envelope shut and cut off 2” parallel to the short side. You should have a little pocket 4 ½” wide by 2” high. Fold the sides of the envelope in to create a gusseted pocket. Don't worry if it is not perfectly neat, it will be hidden.







Mount the image on the Honeycomb and Raven Mattes as shown. Attach a button to the bottom center of the Honeycomb matte with embroidery thread.




Score the strip of Pixie Stick paper at 2 ¼” and 7 ¾”. Fold the short area up and the longer area down to make the pocket and card top. Attach the second button just above the bottom fold – through one layer of the paper only.

Adhere the white square and the Raven matte to the inside of the card. This will give you a place to write a message.

Adhere one side of this envelope pocket you made in the first step to the card base just above the score line. Adhere the other side to the cardstock flap. Your envelope pocket should now form what looks like a mini accordian file in the bottom part of the card.

Tie a length of embroidery thread to the button under the image. You can hold the card closed by wrapping the tread around both buttons – just like the old envelope closures.

I hope this project is not too "scary". If you make one please let me know, I'd love to see it!

Thursday, September 4, 2008

An Odd Bird Lands in the Paper Garden

Odd Bird Planet is arriving at the Paper Garden Projects store! I'm so excited to finally start offering some of the great Odd Bird Planet images.

The first offering is a set of my favorite Odd Bird Planet Halloween images. The set is cling mounted with the images indexed on the cling so you can see where you are stamping. The set includes Witch Shoes, Ghost Bird, Thersa's Spider, Kelly's Web and Boo To You, all packaged in a CD case for storage. You can see the set HERE.

I thought I'd share a couple projects I made with this super cute set. I created a template for the box. Its like a tiny doughnut box. You can download a PDF for the template at Splitcoast Stampers in this thread HERE.

After you cut and score the template as marked, fold all the score lines in towards the center. Then adhere the smaller tabs to the box sides.


Fold down the top flaps and adhere to finish the box.

You can then decorate your box however you desire.

The box holds 3 fun sized Snickers across the bottom. (Snickers are a very important part of Halloween. That and Milk Duds- love those things. But no one ever gives Milk Duds anymore - maybe they got banned by the American Dental Association for pulling out filings....)

Of course Candy Corn is good too... and the box holds plenty.



I made this little box using Ghost Bird (too cute! - love the little birdie feet). The image is mounted on a tab and can be used as a handle to open the box.
For the outside, you need your box, your images, and mattes for your images. You will also need a tab and a back for your tabbed handle piece. I cut my circles and ovals with Nestibility dies, but you could use any shape.

I also added a 12" strip of patterned paper around the sides of the box. 12" will not be quite long enough to go all the way around the box, but the gap will be hidden by the sentiment on the front.


To create the tab to mount the image on, cut a 1/2" strip 2" long and fold as shown. Put adhesive on the top of the two side "wings". Cut a slit in the lid of the box and feed the folded piece through, adhering the "wings" to the underside of the lid.

You can then adhere your mattes to both sides of the tab (I used gray scalloped circles in mine).



I wanted to add more color to my images, so I gave them all a dusting of Dried Marigold ink with a duster brush. I masked ghost bird first with a piece of Eclipse Paper so he would not be orange too! I also left my Nestibility dies in place so I could keep a white border in the images.

I wanted to cover the tab "wings" on my inside lid, so I created a 2 1/4" square Ghost Bird trio. Since I was just inking the very edges with the Duster Brush - I didn't bother masking.



Then - I just assembled my box. Here is a picture of the box open.

I colored all my ghost birds by doing a fade to white with C-1 Cool Gray 1 Copic Marker and added shadows at their feet with YG-91 Putty. You can read more about doing a fade to white with the measuring cup in this post HERE.
Here is box number two. You have to love those shoes! HeeHee.

For this box, instead of the handle being an image tab, I created a felt ribbon tab and then mounted the image over it on foam tape to hide the ribbon tails. I actually stapled the ribbon in place so it would be very secure.









Before I assembled the box, I randomly stamped Kelly's Spiderweb and Thersa's Spider in Brilliance Platinum Planet ink. Look how well is shows up on black - its one of my favorite Brilliance inks.

I also stamped some on the inside bottom and lid of the box.


Then I assembled the box.

I added an image on the inside to finish it off and hide my staple. I love that little spider, especially his eyes.

I added a Happy Halloween Sentiment from Odd Bird Planet to the front.

Hmmm.... is that an EXTRA Snickers sitting over there..........


Thanks so much for stopping by! (but I'm not sharing the Snickers....)

Monday, July 7, 2008

Just breathe.........

I have no air! (In my Copic air can I mean....). My can ran out of juice a couple months ago and I have not had a chance to get another - so no air brushing for me. I thought I'd share how I have been making "sky" and "grass" since I became "breathless".

Of course this would work with any colored image, not just Copics.

First stamp and color your image. Here I used the one of the little boys from the exclusive Little Boy Blue Stamp kit from Paper Garden Projects.

While your stamp is inky, go ahead and stamp a mask for the image. I love Eclipse Paper for this. It has post-it note like sticky across the whole back and the paper is thin but pretty tough, so it can be reused. I store my masks in the CD case with my stamps so I don't have to cut it out again when I need it.

Mask your image and apply ink to the sky area with a duster brush.

My favorite inks for this are the Ranger Distress inks because they stay wet a little longer and go on very evenly - but any dye based ink will do.

My mask does not cover all the "grass" in my picture. I'm not too concerned if a little blue mixes with the edge of my grass - but I really do not want any blue on my little boy's face! So I made sure my mask completely covered the little boy. I didn't worry about covering the bugs.


Just ink the duster brush by tapping it on the pad. Tap off the extra ink on scrap paper, then sweep the brush from the scrap paper, across the edge of the image, and towards the center. Keep sweeping till you get the darkness you want, turning the paper as you go around.


Here I added a little green to the bottom edges.





And here is the finished card. The cute little duck is part of the kit too. He is cut out with a Nestibility die and popped up on foam tape. I inked the edge of the circle with the duster brush as well.

Here is another card using a different image from the Little Boy Blue Stamp kit. The sky was done in the same way here and Vintage Photo distress ink was added to the "sand" at the bottom.

This technique won't give you the exact same result as the airbrush. The color is not quite as even and there is intense color at the edge of the cardstock.

But I think it works quite nicely. And the duster brushes can be used for other effects.

You can use the Eclipse paper to create a mask and then ink around it with the brushes. Or use a decorative punch with the Eclipse paper to create a stencil - you can then ink inside the punched area.

The duster brushes can also be lightly brushed over paper to enhance the texture - it works great with Cuttlebug embossing.

So that is my take on Duster Brushes, one of my favorite tools. Thanks so much for stopping by!

Monday, June 30, 2008

Playing with Copic Blender Solution

I thought I'd use this cute little image from the "What A Character" kit from Paper Garden Projects to share a little more of what I learned in my Copic Certification class. I did a little experimentation here.

I stamped the image in Memento Tuxedo ink (I love the Memento for use with Copics). Then I colored and shaded just the dress. (for shading, I imagined the sun in the upper left - so I added darker color along the right side and a little at the bottom.

Here is the experiment - I wanted the dress to have some texture, so I added the colorless blender solution to a clean terrycloth rag and dabbed it on the dress. (this was a technique we learned in class). Now, this adds quite a bit of blender solution to your picture - so you need to make sure the stamping ink is very dry. I was impatient and did this when my coloring was probably still damp. You get crisper impressions if the base Copic ink is dry. This can be tricky - too much solution and the ink will flow outside the image lines lines (like the right edge of my dress). Also, you need to color the areas of texture first, do the texture, let it dry and then color the rest. Otherwise the blender solution could make all your colors run together.

This is a little tricky and I need more practice, but some of the sample effects I saw were awesome.

Another thing on this picture, I wanted the shoes to have a little shiny highlight, so I colored them solid, let them dry and then used the blender pen to remove the color on the "sunny" side of the shoes.

This looks OK - but the saying is a little flat.

So, I went around the inside of the outer edge of the voice balloon with B-60 (pale blue Grey). You can see that here.














To soften it, I took the colorless blender pen and blended in small circles from the colored edge to towards the center. This is one thing the blender pen does very well, blending color to white. I like this softer look better.

I also used the B-60 to create shadows below and to the right of my image (because my "imaginary sun" was in the upper left).









I just want to quick show you the backside of the image. This is 80lb weight cardstock and you can see the color bleeds right through. (this is why I have to keep reminding myself not to color the inside of cards!).

If you are having a hard time getting a smooth layer of color when you are coloring large areas, try looking at the back of your work. The color should bleed through the back pretty evenly. If its not, try coloring in small circles and giving the pen just a wee bit more time to saturate the paper with ink. You need to color slow enough to saturate the paper, but fast enough to keep a wet front edge.




Here is my simple card. (Sorry - had to take the picture with a flash - the sun went down, and way before I was ready!).

One last thing, when I colored the plate, I used a green that was just a little too bright to blend with the paper in the card kit. So I simply colored over the plate with a layer of cool gray #1 (C-1). This is a great way to tone down colors and I'm learning to use it more and more. I need more grays! (markers - not hairs, got plenty of those).

Well, if you hung in this far you deserve a prize! But I don't have one..........

One quick question, to my regular readers (yes, all 5 of you). I usually don't note the Copic colors I use because..... I didn't think anyone would care..... So do you care??

Thanks for stopping by. Tomorrow is Garden Party day and I think I like what I came up with this week.

Wednesday, November 14, 2007

Easy paper ornnaments

These are super easy paper ornaments that look very pretty on a tree.

They are also very light, which is great if you are trying to hang them on a miniature real tree. (they are hanging on a 2 year old rosemary plant here).
















The first step is to punch (or diecut) 6 of the same shapes. Here I used the Marvy Giga scalloped circle. Score down the center of each.

I used Basic Grey double sided paper and gold embossed snowflakes from the Inkadinkado Snowman Sketch clear set on the planer side of the paper. It is easier to score before you emboss.


Fold the shapes in half with the right sides inside the fold. I alternated the embossed and the patterned paper.

Then start gluing the wrong sides together to start building your ball.

Note that with the Marvy scalloped circle, the score will go through one bump on one end and between two bumps on the other. So if it seems like the pieces are not fitting together, turn one of the pieces around and it will fit fine.



Once you have 3 pieces glued, adhere a scrap of ribbon into the center for a hanger.

Then finish gluing the rest of your die cut shapes - gluing the last one to the first one to complete the circle.

If you wish, you can glitter or emboss the edges.

And that is it! You're done!

(in my samples, the other was done with the Marvy Mega Oval punch).

Tuesday, November 6, 2007

Beaded Candle Holder Tutorial

Edit: I need to remove the pictures from this post because the project will be published. So Sorry (I am excited about getting published though!)


Well, maybe I can make up for my absence a little....



Here is a little tutorial for beaded candle holders. My pictures are not the greatest, but these really do look nice when they are lit. And the project couldn't be simpler. With your help - kids could easily do this to make Christmas gifts.








To make these, you will need a straight sided glass candle holder. You can find these cheap at craft stores.

You will need microbeads and the double stick sheet adhesive that is used with them.

You will also need your image of choice stamped on vellum.

For my holders, I used Adenville from justjohanna because I wanted a village in the snow. I also did a holder with the Snow Friends stamp from Great Impressions.

(the tutorial is a bit of a mix because I was not too organized with the pictures!)

Cut a strip of sticky film to the width of you candle holder and adhere it around the glass.

Color the back side of your stamped vellum image with markers and cut out around it, leaving a little border.







Remove the top layer of the sticky film. Place your colored image on the sticky film marker side down - positioning it as you wish.

Roll the candle holder in the microbeads all the way around. Then roll the candle holder on a firm surface to really adhere the beads. The sticky film is really sticky and once the beads are on, they really stay put.




That's it! You're done.






Monday, October 15, 2007

Haunted Hidden Slider Card

This is a fun little interactive slider pocket card where the slider mechanism is hidden behind an image.


For my card, I used the justjohanna "Short House" stamp and decorated it for Halloween. The ghost is actually ghost bird peaking from behind. The greenery is the sea weed stamp and the pumpkins are pumpkin bucket without the handle. I love putting together little scenes like this - so fun!



Anyway - when you pull the slider......



From behind the house, out pops Al in a witch hat!





I've included instructions below on how to make a hidden slider card. They may look complicated but they are really not! All you need are two images - the one to pop out and a bigger one for it to hide behind. The rest is made like a pocket card - but with a slider added.



The cards can be made any size, but to make a 5 1/4 inch square one like this you will need:


Base cardstock 5 1/4” by 11”. Score perpendicular to long side 2 7/8” in from each side to make the pocket. Do not fold the pocket yet. (black paper here)

5” square of stamped or patterned paper (purple here)

41/4” square matte (orange here)


4" square background cardstock (black here)

Cut cardstock, 5 1/8” square for the slider, round side corners (orange here)


Your 2 stamped images, colored and cut out. Make sure to leave a tab on the side of the smaller image to attach to the slider .





Lay your large image on your 4' square background piece and mark where you want your smaller image to pop out.

















Now, take that off and lay your smaller image on the background so that it is behind the mark you made before. Mark the far edge of your small image. Note - if it is a tight fit to hide your slider image, you may want to mark both sides of the bigger image to make sure you slider image stays hidden.















Now - matte up all the layers of your card and adhere. With the flaps of the pocket still open, cut a slit through all the layers between the two marks you made. This is what your image will slide on.





















Adhere the tab of your slider image to a folded cardstock strip (see picture)



Slip this strip into the slot so that your image is on top of your background. Move the image to the position where it will be completely hidden.













Flip the entire card over. Apply adhesive to the cardstock strip only. The slider cardstock will need to move freely in the pocket.




















Lay the slider cardstock over the back, lining it up with the edges (as if the slider were closed). The slider cardstock should adhere only to the cardstock strip where you placed adhesive.



Fold up the sides of the pocket around the slider cardstock and adhere.



Flip the card over and adhere your larger image in place using foam mounting tape or pop dots. Take care to place the tape where it won't get in the way of the smaller image sliding.


When you pull out the slider card, the pop out image comes with it, causing the smaller image to pop out from behind the raised larger image.



This may sound complicated - but once you actually do it, its easy.


If you make one - please let me know, I'd love to see it!

Saturday, September 29, 2007

Tile Tutorial

For some reason, this tile has been generating comments and questions over at Splitcoast Stampers lately - even though its been in the gallery for a long time. I tried to explain how to make it when answering PM's with questions, but I thought something with pictures might be more helpful. (having said that - please excuse the tutorial picture quality. I knew there would be some glare, but yikes!)

These tiles are extremely easy to make. The hardest part for me is finding quality tumbled tiles that are not too chipped or pitted (you can see in the tutorial that the ones I have left are not the best).

You can find tumbled tiles in most home improvement stores. The tumbled tiles are better than glazed tiles for coasters since the can hold moisture better. I look through the tiles and choose ones that are smooth and have few holes so any stamped images will stamp cleanly. Sometimes this takes a while and pretty much all of them will have some imperfections.


Other supplies you will need are:

  • A selection of Ranger Alcohol Inks in the colors you desire. Include one of the Metallic Mixatives if you wish,

  • An alcohol ink applicator and felt

  • Alcohol ink blender solution

  • Permanent ink for stamping your image

  • Stamps

Before beginning, put a small amount of Blender Solution on a paper towel and clean off the tile to make sure there is no dust or oil.







I wanted a green tile so I chose a selection of green Ranger Alcohol Inks (Meadow, Lettuce and Bottle).


My method is to choose a primary color (Meadow) and apply the most of this color to a clean felt pad. Then I choose a secondary color (Lettuce) and apply less of that. Then I choose a third color and apply a small amount of that to the pad. I add a small amount of blender solution (the more solution you add, the less intense the colors will be).


I "pounce" my applicator on the tile surface, turning it as I go to keep the colors random. I just keep pouncing until I'm happy with the coverage (don't forget to color the sides of the tile as well). If the colors are not intense enough, you can add more alcohol ink to the felt.


If you really don't like what you are creating and want to start over, you can clean off the tile with blender solution. It will still be somewhat stained, but lightly enough so you can try again.



If I want to add some Metallic Mixative (in this case copper), I add a SMALL amount to the same felt pad I've been using and add a little squirt of blender solution. Then I pounce on the metallic in the same fashion, over top of the alcohol inks. A little metallic goes a long way.












Here is the tile with the Alcohol ink and the copper metallic (sorry about the awful picture). The white spots are pits in the tile. Smoother tiles come out more uniform.

Allow the tile to dry completely before you stamp it. Any wet alcohol will cause your stamp ink to bled.


















Then you just stamp on your design . I used Stazon black here. I have also used Ranger Archival black successfully. Keep in mind that the tile surface may not be perfectly smooth, so you may need more pressure than usual to get a good image (the surface is a little slippery though so you need a steady hand).




If you mess up the stamping, you can start over by cleaning the tile with blender solution before the stazon dries. But it will also clen off most of the alcohol inks too, so you will have to start over.


I put the tile in a 300 degree oven for about 15 minutes to heat set everything. This step may not be necessary, but it makes me feel more secure.

The last step is to put something on the back of the tile to prevent the tile from scratching furniture. I like to use the cork shelf liner available at home improvement stores - but you could also use felt.

This green tile uses the
justjohanna stamp called "shrubbery" (I love it for backgrounds) and the green and copper inks listed above.



This tile uses a beautiful background stamp from Stamp Camp called "Pretty Leaves" and the Ranger colors Current, Cranberry and Eggplant; and some copper. The design shows up much better in real like without the glare.






I hope this little write-up encourages someone to try making a coaster. They reall are easy and fun. If you make one, let me know - I'd love to see it.